1.	To install "Bodymaker Force Monitor" version or to update the software version: 

	Run the "Install BFM.bat" file by double clicking on it.


2.	If installing for the first time, also do the following (not required if the computer
	will only be used for analysing results and not for making new measurements:

	Run (double click) the file named icalsetup.exe on the CDROM. Note,do this before
	connecting the USB cable. Follow the instructions on the screen to install the
	InstaCal program.

	Connect the USB cable between computer and interface box. Wait for the data-acquisition
	device to be detected by Windows and for the hardware to be installed. It is important
	to do this before starting InstaCal. If the Windows New Hardware Wizard opens, When
	asked "Can Windows connect to Windows Update to search for software?", select "No, not
	this time". On the next screen, select "Install the software automatically (Recommended)".
	
	Start the InstaCal program from the Measurement Computing folder in All Programs
	from the Windows start menu. The data-acquisition device will be automatically detected
	and added to the config file. The program can then be closed. Note, if a different USB
	data-acquisition interface box is used at any time, InstaCal will have to be run to
	change the config file.

	A folder called "BFM" will be created on the C: hard drive

	The "Bodymaker Force Monitor can be started by running the bfm.exe file
	(A shortcut can be put on the desktop, if wanted)

	The training presentation will also be copied into the ""BFM" folder

	A folder called "Data Files" will be created in the ""BFM" folder.
	This is where data files will be put when measurements are made. 

